Industrial Steamer for Surfaces (De-grease to Antimicrobial Use of Steam)

Dry Steam for Antimicrobial

Antibacterial:  What is the difference between wet and dry steam?  Wet steam contains droplets/fog/mist and is therefore only at the saturated temperature.  Dry steam includes no water droplets – so may be used for a variety of difficult novel cleaning purposes like sanitation and disinfection type use.  The residence time required for inactivating bacteria/microbes changes with the microbe and also with the surface.  The SaniZap®-600-4  allows for the first time a Steampick(™ type of high velocity use.  Dislodge with high temperature steam at a high velocity to reap the benefits of microbial level cleaning with speed.  Step up to the big leagues with a high temperature of 1112°F (600°C) superheated steam cleaner.  The MightySteam® and SaniZap® products offer unparalleled temperatures and cleaning power without the drawbacks of traditional industrial boiler-pressure steamers.

Rapid Degrease Attachment:  With the MightySteam®, made by the SaniZap®-600-4 you can clean surfaces faster and more thoroughly than ever before*!   It delivers maximum decontamination, cleaning and sanitation output in a portable system for uses like food and beverage production plants.  Check out the use in Restaurants starting up after the shut-down.  Dry steam removes oils, soils, fats, mold, and organisms and deep cleans the cracks and crevices of today’s moderns packaging equipment.  Several coverings of viruses and bacteria are like fatty substances.

Benefits

  • Lightweight Unit – MightySteam®.  Compare to others.  There is no boiler so is lightweight in comparison.
  • Safe – No pressurized vessels to rupture. No errant over-spray to cause burns.
  • Efficient – Outlet to output efficiency of ~ 99% even for cold starts.
  • Plug and Play – Plug the MightySteam® in and turn it on. Steam is generated within moments of initial power, even from a cold start!
  • High Temperature – 1122°F/600°C industrial grade steam is ideal for decontaminating a number of surfaces. Higher temperature steam means faster decontamination and more efficient cleaning overall.
  • Durable Design – MightySteam® uses industrial strength components- not flimsy plastics like many existing steamers. MightySteam® has been designed from the ground up as an industrial/commercial steamer, not as a mass-produced consumer/residential targeted steamer.
  • Numerous Output Options – MightySteam® features a diverse selection of output nozzles suited for a number of applications.  Please call 513-772-0404 or Contact Bayzi.
  • Industrial and domestic cleaning use.  Building restoration, Industry, Food production, Hygiene control, Hospitals, Factories, Transport, Offices,  Transportation  Depots

Potential Uses

MightySteam® configurable output nozzles allow it to be used in a wide variety of applications.

  • HVAC dirty coils or greasy surfaces
  • High efficacy antimicrobial impact
  • Aluminum Grates
  • Difficult to reach contaminated surfaces
  • Food Processing Equipment
  • Stainless Holding Vats
  • Smooth Concrete Surfaces
  • Frequently Contacted Surfaces such as Railings, Doorknobs, Handles, and Knobs
  • Paint – oil and synthetic.
  • Some graffiti
  • Bird or vermin poop fouling
  • Micro-technical parts.  Rapid cleaning with high temperature steam.
  • Remove Algae, moss, and fungi from dusty and humid locations
  • Dislodge wax and Bird-droppings
  • Clean and dislodge yukky chewing gum.  Restaurants have this problem.
  • Pest Control such as Mites, Bed-Bugs and other Nuisances.  Please access the learning center page.
  • The steam will denature and kill off spores but the data is not complete if this is possible with all spores.   Hard surfaces – no problem.  Use on stone, porous-concrete and bricks etc. When using on clay caution should be exercised.
  • Degrease and clean large parts in less than five seconds.  In the pictures below the dirty chuck (top row) was cleaned within a few seconds.
  • Best Practices To Sanitize Tables, Bleechers, Benches, Handles, Door Knobs And Other High Touch Areas:    Steam should be dry super-heated vapor phase steam to kill bugs effectively. USe the high temperature SaniZap models with high temperature, high velocity, high efficacy.  If your steam cleaner is spraying water and not steam-gas, the spray is below 180-260C (inversion temperature) and you are in danger of spreading the virus, or worse, aero-solizing it into the air around you.

Easy to clean difficult regions
SaniZap 600-4-240 2

What is the difference between wet and dry steam?  Wet steam contains droplets/fog/mist and is therefore only at the saturated temperature.  Dry steam includes no water droplets – so may be used for a variety of difficult novel cleaning purposes like sanitation and disinfection type use.  The residence time required for inactivating bacteria/microbes changes with the microbe and also with the surface.  The MightySteam allows for the first time a Steampick(TM)

Step up to the big leagues with a high temperature of 752°F/1112°F (400°C/600°C) superheated steam cleaner.  The MightySteam® offers unparalleled temperatures and cleaning power without the drawbacks of traditional industrial boiler-pressure steamers.

With the MightySteam®, you can clean surfaces faster and more thoroughly than ever before*!

Step up to the big leagues with a high temperature of 752°F/1122°F (400°C/600°C) superheated steam cleaner.  The MightySteam® offers unparalleled temperatures and cleaning power without the drawbacks of traditional industrial boiler-pressure steamers.

With the MightySteam®, you can clean surfaces faster and more thoroughly than ever before*!

Clean/disinfect or decontaminate face shields/face-masks and other protective surfaces including shoes. Use for wide-area cleaning prior to the start-up of several commercial places.  For guidance on decontamination, please see the attached links SaniZap® or HealthySurface® or the Learning Center along with other resources on the web.