Mobile Steam Generation unit with steam wand and steampick for high velocity industrial clean steam spray. Power ~5 KW
- Discharge superheated steam-temperature 450°C (842°F)
- The voltage at wall required is single phase 240V. 50/60Hz. NEMA plug provided.
- Boiler-free, ~4-4.5 kg/hr superheated-steam jet.
- Patented product. Mobile unit. Castors included.
- All cords included. Thermocouple and temperature read-out included. Units will comprise control box that may be separated from steam producing unit (picture shows the integrated style).
- Pure steam. The temperature indicator is built-in. Continuous jet-use beyond an hour is allowed as long as device is used is within the allowed the specifications.
- Patented product. Mobile unit. Castors included. All cords included. Thermocouple and temperature read-out included (will differ slightly between versions).
- Over-temperature display and safety shut- off is included which is user adjustable.
- Safety against earth fault (ground fault) is provided. The type differs between unit types.
- Stand three wire electricals.
- Learn more about sanitation, sterilization and disinfection.
Selections to be made during ordering.
- Standard is Full-Wand (hose) ~4.5 ft or Half-Wand ~2.5 ft. Full wand may drop about 100C and half wand may drop about 50C the steam temperature at the exit. The default is Full Wand. No extra charge for either.
- Custom 6ft hose is also offered. Please Contact Bayzi Corporation.
- Please select Canada Electronics if for Canada Use.
- Optional High Temperature Air Blower is only additional: VTA-01 (115V 1kW) or VTA-02 (220/230V 2kW) both for 600C maximum output. This is a hot air blower for additional drying or cleaning. Independent of the MightySteam unit.
- Extension cable (electrical cable extention) is $495 per 25 ft.
- Deep Penetration. Improved Productivity. Reduced process time. Defend with MightySteam®.
- Higher Temperature. Moisture-free production of non-chemical steam. No organic residue from steam. Clean without Contaminating.
- Use in sensitive spots where chemicals should not accumulate. Sensitive spots include pet-messes.
- Best energy efficiency with patented steam production. No boiler. On-Off at will.
- Easily dislodge hard to clean sticky substances with the 450°C (842°F) type steam. Cleanse at many levels. Microbe to Dirt/Grease levels.
- Control the temperature easily. With controls and application distance.
- Recycling of plastics and other non-disposables. A steam cleaning regiment could provide rapid productivity and cleanability.
|Phase||Single Phase, 50/60Hz|
|Pressure||1 bar / 14.5psi absolute (0 bar relative to room).|
|Maximum Steam Temperature||450C|
|Water Reservoir||~6-8 Gallons|
|Steam Production||Within minutes|
|Heatup Time||10-60 Seconds|
|Runtime Typical||~ 1-2 Hrs between refills|
|Body Material||Lightweight Composite and Steel|
|Dimensions||As shown (without panel 0.75m -1m depending on dimension)|
|Movement||Castors plus movement of steam wand for steam direction|
|Temperature Indicator||Included. OTC included|