MightySteam® uses modern technology, so we will gladly answer any questions you may have. Please contact us (on-line or phone) with any of your questions. Some possible questions and answers:
Q: I cannot see the price?
A: Please create your log-in. Whereas no log-in is required to view the steam cleaning pages, a log-in with your credentials (name, create password and contact information) is required in the check out in order to view prices. http://bayzi.com/index.php?route=checkout/checkout. There is no need to create any payment just to view the prices.
Q: I have used the MightySteam®. ~1 kg/hr handheld. Works great. Do you offer larger units?
A: Yes, please link to http://www.mhi-inc.com/superheated_steam.html where you will see larger size units listed. Please follow the contact us information that is also listed for larger units.
Q: How do I know that the steam has cleaned? What does clean mean?
A: This is a great question. Clean can mean anything from tidying-up to removal of microbes such as bacteria. For cleaning grease and loosening dirt or cleaning bird droppings, it is possible that you can visually observe the cleaning and thus satisfy yourself of the quick cleaning efficiency. Cleaning also implies disinfection or sterilization. At these levels the question becomes more technical but a great answer can be found on http://edis.ifas.ufl.edu/pdffiles/FS/FS07700.pdf. which describes different types of cleaning and cleaners. This article was written before the MightySteam® was introduced. The MightySteam®. offers low to high temperature steam for different typesof cleaning with the flow control temperature adjustment. The Dry steam without moisture in it is a known antimicrobial agent. Generally the steam has to be significantly non-condesing which means that yo have to set the MightySteam®. to the higher temperature condition and also ensure that the residense time of the steam on a surface is adequate. The studies listed below (please click on them to link) should be able to convince you that properly superheated high temperature steam is a non-toxic antimicrobial agent that works without the fear of chemical accumulation, unlike a toxic chemical. Generally cleaning of food items requires at least a five log reduction in bacterial after cleaning with a chemical or fluid - within about 30 seconds. Sterilization implies a lot higher reduction, almost six to twelve log reduction- sterilizers are allowed to take a few hours of operation. The verification of this level of cleaning is best left to a professional. However several kits listed on the Bayzi Blogs section may be used for approximate determinations and if allowed for use by your microbiologist you could also consider the use of chemical indicators. Do not be satisfied by claims such as 99.99% removal if your cleaning need is for a higher efficacy cleaning. Such numbers do not represent a four to six log reduction. All Bayzi Affiliates should be able to help point you towards a professional testing center with trained professionals who could verify specific reductions that you may be specifically interested in.
A: Yes here is a list of some studies:
Q: Should I reduce the use of other cleaners?
A: Only your microbiologist or toxicologists should answer this question for you. Treating by high temperature steam does not always eliminate the benefits of washing, cleaning or any other sanitization procedures normally used. Treating by steam does not ensure or guarantee in any manner that your surface will be free of microbes because such a claim should be verified in specific situations by trained microbiologists working closely with government agencies. Bayzi does not and cannot make such a specific claim for you without the scrutiny and approval by a government agency or state agency as applicable. There is NO guarantee or health claim intended with MightySteam™ or the HealthySurface™ brand and related steam treatments. Please check resources for open published articles that may indicate such an effect.
Bayzi does not make any claims regarding reducing or eliminating microbes in every environment. Such a reduction depends on many factors such as correct use, proper residence time, high impact steam temperature, durability and hardiness of microbes amongst other factors. Use steam to reach and penetrate those difficult to reach places and consequently minimize or avoid the use of high concentrations of toxic chemicals. Regardless please check with independent professionals to verify your specific reduction target. Steam Cleaning is believed to reduce total microbe counts (including Coliform count), reduction of fungi and biofilm formation tendencies, reduce total mesophilic aerobic counts and reduce spoilage related organisms' psychrotropic counts. The steam treatment is not permanent and may only be good until the next microbe that lands or colonizes on the surface. The efficacy of any treatment is expected to decay quickly over time.
Pure clean steam when available at the right high temperature and for the proper minimum application time is known to have good antimicrobial properties. A quick test of good steam is steam strips but it may not be enough to identify efficacy for new Zika and other viruses. Only specific tests done by microbiologists should be considered.
Q: How can I get a discount?
A: Bayzi Affiliates can offer you a discount on the list price. If you want us to provide you with an affiliate address we will gladly do so or if you want an Affiliate to contact you with a discount coupon, please let us know through our contact us page. Some affiliates can provide you with a significant discount should you meet the criterion for the discount.
Q: Can I become a Bayzi Affiliate?
A: Become a Bayzi Affiliate. You have to register and be approved. This takes a few weeks after your application has been received. You will have to let Bayzi know that you can become a professional bonafide Affiliate. Currently, Affiliates are only being accepted in the South America, Europe, Asia, Canada and Mexico. Please don’t be alarmed or offended if we do not respond - your application is definitely on file with us.
Q: Compare Steam Drying with Hot Air Drying?
A: When comparing drying and sanitizing methods, the overall objective and cost is important to consider. There are a few studies listed on Wiki.* Bayzi suggests you take a careful look and contact your own known microbiologist or food industry expert for a clear picture. Your question also found an unusual answer on Wiki which lists the following article:
*A comparative study of three different hand drying methods: paper towel, warm air dryer, jet air dryer’ by K. Redway and S. Fawdar of the School of Biosciences, University of Westminster London
Please consider MightySteam® as a possible alternate to the air dryers that apparently cause an increase in bacteria after using the dryer. We also very much appreciate your business.
The MightySteam® is a durable, industrial quality steam generator capable of delivering 752°F steam. Years of research and development have helped the MightySteam® become one of the first high-temperature steam generators that can operate without a high pressure boiler.
Steam has a great amount of stored enthalpy (enthalpy difference compared to 25C) for any temperature above 100C, when compared to air at the same high temperature. This is why when you use a heat gun to heat a pipe for example; you must hold it in position for a few moments before it becomes effective. With the MightySteam®, there is high enthalpy, so it won't just blow bed bugs around. MightySteam® uses thermal energy delivered in a low velocity steam, allowing for a more efficient transfer of energy (in this case, heat) to the surface or object you are heating.
When used for cleaning, superheated steam is capable of transferring energy much more efficiently than hot air, allowing for the disruption of the biological functions of bacteria. For the same change in temperature from 25C to 300C the enthalpy content is much smaller for air. The temperatures/energy needed for hot air to be effective may thus require a much higher temperature due to the inefficient nature of heated air. The MightySteam® is a durable, industrial quality steam generator capable of delivering 572°F steam. Years of research and development have helped the MightySteam™ become the first high temperature steam generator that can operate without a high pressure boiler.
Q: When do you dry with steam instead of drying with hot air?
A: There are many benefits to using steam but the main one is the availability of steam with high stored enthalpy (loose translation is stored heat) at a lower temperature than the corresponding dry air of the same enthalpy even at a much higher temperature. So if you were interested in drying paper which has an ignition temperature of about 450F - the use of superheated steam at a much lower temperature may produce the same drying efficiency/effect as hot air at a temperature above 450C i.e. above the paper ignition temperature. More drying energy is available from steam.
Q: Can I use MightySteam™ for....? Is cleaning important?
A: We're constantly adding videos and pictures to show what you can use the MightySteam® for... Not all have been vetted by us - so we ask you to exercise caution. If you have a suggestion or idea, please send an email to email@example.com and we'll try our best to get a demonstration video up for you. See also http://stellarfoodforthought.net/following-sanitary-design-best-practices-key-to-avoiding-food-safety-recalls/
Q: How fast does steam work on standard biofilms?
A: Studies** made recently at a prestigious university (Ohio State University in Columbus OH) indicates that biofilms and biofilm formation can be mitigated with MightySteam®. Please also click for more information on the study references linked on this page. Please do not hesitate to contact Bayzi for more information. Bayzi will either connect you to the researcher or research funding agency or will send you a publicly avaliable research report if feasible. By contacting Bayzi for any report, please note that you are certifying that you are a professional in the field who can technically follow the report with advanced microbiological knowledge.
** These studies although conducted by world renowned recognized professionals and performed with high integrity, may also have benefited from direct industrial involvement from interested companies or clusters that have interest in the outcome.
Q: Is the price competitive?
A: MightySteam® is powerful, fast, hot-steam device. Superheated steam is a known antimicrobial agent. Unique flow-controllable temperature allows you to go from ‘Simple Clean Mode’ (low temperature) to’ Disinfectant Clean Mode’ (higher temperature). MightySteam® offers one of the the highest temperature steam of any commercially available steam cleaning tool (Click for details). MightySteam® units produce 752°F (400°C) or hotter steam within about a minute (variations depend on model number). Superheated steam will soften/dislodge common grease and many other sticky substances. Importantly, the unique technology gives you the very hot steam at a comparitively low cost (compare prices for the temperature of output i.e. in units of $(price)/°F(rated temperature)).